CAMheads CNC Router Forum By: CAMaster CNC

CAMheads CNC Router Forum By: CAMaster CNC (http://www.camheads.org/index.php)
-   Vectric Rotary Files (http://www.camheads.org/forumdisplay.php?f=78)
-   -   Wraped work (http://www.camheads.org/showthread.php?t=2794)

neal_meyers_jr 03-14-2013 09:01 PM

Wraped work
 
1 Attachment(s)
130 Spindles done. Now for the rails........[fantastic]

BFenn 03-14-2013 09:12 PM

Neal,

You have been a busy guy. They turned out well. It will be nice to see the rails, when you complete them.

neal_meyers_jr 03-14-2013 09:14 PM

I will post. Too much work went into using the recoil All Camasters should get them![fantastic]

eandico 03-14-2013 09:30 PM

How long per spindle?

neal_meyers_jr 03-14-2013 09:35 PM

90 minutes per roughing. 30 min finishing each one.

Mick Martin 03-14-2013 09:59 PM

What is the length and max diameter of the spindles? What wood did you use?
90 + 30 = 120 minutes per spindle x 130 = 1560 minutes = 26 hours WOW [clap]

eandico 03-14-2013 10:26 PM

Ya missed a zero there Mick! 260hrs
2hrs per is a long time!!!!!!!

Mick Martin 03-14-2013 10:45 PM

Quote:

Originally Posted by eandico (Post 24833)
Ya missed a zero there Mick! 260hrs
2hrs per is a long time!!!!!!!

Your right Nick ..... I ran out of fingers and toes [lol]

rcrawford 03-14-2013 11:32 PM

2 hours each? That's dedication! You need a lathe duplicator. Could make them in less than 10 minutes each with an old fashioned duplicator!!

You could also change your stepper motor for a normal lathe motor, and mount a gouge and a parting tool to the aluminum plate where the spindle is mounted. Then use the Y and Z axis to carve out the shape from above with the gouge and parting tool while the lathe spins (just offset the gouge and parting tool so both can be mounted and used by just changing the x position).

Or mount a mini lathe onto the cobra bed and do the same thing with a gouge and parting tool. Just some thoughts to speed things up!

JohnnyCNC 03-15-2013 12:02 AM

Neal,

I'd like to discuss your feedrates with you. I believe we can cut that WAY down. I could be wrong, but email me your tap file if you will. I'd like to have a look. Also include your wincnc.ini file and your Aspire post processor if you don't mind. It'll probably be tomorrow before I get a chance to look at it, but I will look at it for you.


All times are GMT -4. The time now is 04:04 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.