CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > Items for sale or trade > Miscellaneous Items

Reply
 
Thread Tools Display Modes
  #1  
Old 12-10-2014, 03:17 PM
intensetactical intensetactical is offline
CAMhead Friend
 
Join Date: Dec 2013
Posts: 13
Default .5 in cast acrylic

Hey guys, looking to get rid of some .5 in cast acrylic scrap we have laying around. We have quite a large amount that needs to go so i would like to sell it in boxes of 5 at a time. If you have a need for a large amount send me a pm and we can get some on a pallet for you.

sizes are :

14x18 - these pieces are all a little over this size and have tabs on all four sides.
This size will be $50 + $25 shipping anywhere in the lower 48 for a box of 5


19x31 - same with this bunch, a little oversized with a tab on each side.
This size will be $100 + $30 shipping anywhere in the lower 48 for a box of 5


If you are interested pm me and i can get you a paypal invoice.

Thanks,
Eric
Reply With Quote
  #2  
Old 12-12-2014, 05:38 PM
Triddle Triddle is offline
CAMhead Friend
 
Join Date: Jan 2014
Posts: 13
Default

Where are you located?
Reply With Quote
  #3  
Old 12-12-2014, 08:33 PM
Bryan Rocker Bryan Rocker is offline
CAMhead Friend
 
Join Date: Oct 2014
Location: Beavercreek Ohio
Posts: 25
Default

My thoughts exactly ;)
__________________
Bryan Rocker
Measure X times cut once!
Reply With Quote
  #4  
Old 12-15-2014, 02:24 PM
intensetactical intensetactical is offline
CAMhead Friend
 
Join Date: Dec 2013
Posts: 13
Default

we are located in Houston Texas.

Ill get some pictures of the acrylic up hopefully today.

Yes it has paper still on both sides.
Reply With Quote
  #5  
Old 12-15-2014, 02:42 PM
intensetactical intensetactical is offline
CAMhead Friend
 
Join Date: Dec 2013
Posts: 13
Default

Here are the pictures. You can see the tabs one the side, They are about 1/2 in wide.
Attached Images
File Type: jpg IMG_20141215_132636_901.jpg (92.4 KB, 81 views)
File Type: jpg IMG_20141215_132731_102.jpg (80.6 KB, 83 views)
File Type: jpg IMG_20141215_132803_730.jpg (95.1 KB, 78 views)
Reply With Quote
  #6  
Old 12-16-2014, 08:22 PM
ksmith1961 ksmith1961 is offline
Camaster Owner
 
Join Date: Sep 2013
Location: Siloam Springs, AR
Posts: 165
Default

Sent you a pm.
__________________
Stinger II SR34
Porter Cable 2.25hp Router
Indexing Lathe
Performance Package (FTC / On-Off via G-code / Laser Cross Hair)
T-Slot Table
Aspire 4.5
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:54 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.