CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > CAMaster Machines > Stinger Series CNC Routers > Stinger III

Reply
 
Thread Tools Display Modes
  #1  
Old 08-04-2018, 09:44 PM
Mark Maslonkowski Mark Maslonkowski is offline
CAMaster owner
 
Join Date: Jun 2014
Posts: 38
Default Manually Z each tool x3

How would I go about manually setting the Z height for tool 1, tool 2, and tool 3 on my x3? I ask because the built in off set doesn’t seem to be accurate.
__________________
Mark Maslonkowski
Equipment:
Stinger III x3
3.0 Kw Spindle / Digital Speed Control
Hurricane Vacuum Table
Recoil Indexing Lathe
Epiloge Helix Laser
Complete Wood Shop
Software:
Aspire
CorelDraw x6
Cut2D
Reply With Quote
  #2  
Old 08-05-2018, 09:24 PM
Gary Campbell's Avatar
Gary Campbell Gary Campbell is offline
CNC Tech & Trainer
 
Join Date: Dec 2012
Location: Marquette, MI USA
Posts: 2,655
Default

Mark..
Here is how I test this:

Check for play in the Z first by using a 1 by 2 and prying up/down to see if there is any movement

Measure T1, then bring it back down to the surface til Z reads zero by typing in "Z0" and pressing enter. I used feeler gauges to test just how far, if any the bit is off

Do the same for T2 and T3 checking to see if there is a variance.


Write any differences down and let us know what you find.
__________________
Gary Campbell
CNC Technology and Training
The Ultimate Woodworking Machine
GCnC411@gmail.com
https://www.youtube.com/user/Islaww1/videos

"There are 10 kinds of people in the world. Those that understand binary logic, and those who don't"
Reply With Quote
  #3  
Old 08-09-2018, 09:19 PM
rcrawford rcrawford is offline
Cobra Owner
 
Join Date: Dec 2011
Location: Alberta
Posts: 2,177
Default

To manually set the offsets for each tool for ATC machines, lower the tool to where you want Z0 to be and type in M37Z0H1 for tool 1.

Depending how your wincnc.ini file is set up, you might have to type in M37Z0T1 instead.

Do the same for tool 2 and 3 (using either H2, H3 or T2, T3).
__________________
Russell Crawford
Cobra 408 ATC with recoil
Alberta, Canada
www.cherryleaf-rustle.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:41 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.