CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > CAMaster Machines > Elite Series

Reply
 
Thread Tools Display Modes
  #1  
Old 07-21-2018, 08:44 PM
Rlee1972 Rlee1972 is offline
CAMaster Owner
 
Join Date: Mar 2017
Posts: 419
Default Setting up the Elite

Our Elite arrived Wednesday and as all of you that have received machines know, the rest of the week has been quite busy installing vacuum lines, running new air lines, etc, etc. I would like to give a big shout out to Paul who graciously delivered our new beast. Paul turned our unload into a breeze and I encourage all of you that are remotely close to Cartersville to request him when buying. He brought both machines and saved us HOURS due to his experience and knowledge. I can not say enough good things about him. Look him up!

I have attached a few pictures and will be attaching more soon as we proceed. It is taking a little longer than normal as we are stripping out all of our air lines and starting over with the addition of more electrical capacity as we have recently switched over to 3 phase.

To all of those who contributed input when we were spec'ing the Cobra out (you know who you are!), a great big thank you! It is a BEAST of a machine. To the team at CAMaster, once again you have delivered! Thank you for everything including the last minute additions.....
Attached Images
File Type: jpg IMG_0986.jpg (96.6 KB, 132 views)
File Type: jpg IMG_0991.jpg (96.3 KB, 126 views)
File Type: jpg IMG_0994.jpg (98.3 KB, 125 views)
File Type: jpg IMG_0995.jpg (96.9 KB, 133 views)
__________________
Ron Lee
Blackshear, Ga
2018 Cobra Elite 5 x 10 ATC
20 Tool Holder
25HP Regen Vac

2017 Panther 408
HSD 5HP ATC
6 Tool Rotary Carousel
Recoil Lathe
Laser
Aspire 9.0
PhotoVcarve





"You never learn anything by doing it right."
If that were true, I would be one of the most intelligent people you would ever meet.

Last edited by Rlee1972; 07-21-2018 at 08:46 PM.
Reply With Quote
  #2  
Old 07-21-2018, 08:59 PM
drummerjg drummerjg is offline
CAMaster Owner
 
Join Date: Dec 2016
Location: Addison, PA
Posts: 513
Default

I have cnc envy! Very impressive, Ron. Christmas done come in July....
__________________
Joe Garber
Retired Hobbyist
Stinger 1 SR24
FTC
Laser Pointer
HSD 1.7kw Spindle
Indexing Lathe
WinCNC
Aspire 9
trommlerjg@gmail.com


How to count to 10 in Windows:
1,2,3,95,NT,2000,XP,Vista,7,8,10
Reply With Quote
  #3  
Old 07-21-2018, 09:06 PM
Jim_in_PA Jim_in_PA is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 495
Default

Dang....that's a nice "toy"!!!!! Congratulations on your new baby arriving. May it make you smile and make your accountant's eyes pop out even further with the gain in productivity!
__________________
---
Jim Becker

SR-44, 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
Reply With Quote
  #4  
Old 07-21-2018, 09:15 PM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 6,713
Default

Bada Bing !!!!
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ
Reply With Quote
  #5  
Old 07-22-2018, 09:34 AM
Jim_in_PA Jim_in_PA is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 495
Default

And to think...that big, bad, boy is going to be spending a lot of its time just making "boxes". LOL
__________________
---
Jim Becker

SR-44, 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
Reply With Quote
  #6  
Old 07-24-2018, 11:55 PM
Mike Fuson Mike Fuson is offline
CAMhead Friend
 
Join Date: Jan 2018
Posts: 82
Default

That is one awesome looking machine.
Reply With Quote
  #7  
Old 07-25-2018, 11:17 AM
bruce tait bruce tait is offline
CAMhead Friend
 
Join Date: Dec 2017
Posts: 14
Default

Looking good there Mr. Lee! Now you just need a Stinger to complete your collection.
__________________
Bruce Tait
Riverside, CA
2018 Panther 508
HSD 5HP ATC
8 Tool Rotary Carousel
Hurricane Black Box Vacuum
Mozaik
Vcarve Pro
Reply With Quote
  #8  
Old 07-25-2018, 12:30 PM
Jim_in_PA Jim_in_PA is offline
CAMaster Owner
 
Join Date: Jan 2018
Location: SE PA
Posts: 495
Default

Quote:
Originally Posted by bruce tait View Post
Looking good there Mr. Lee! Now you just need a Stinger to complete your collection.
Yup...and it could likely urn a living quite nicely in his business. :)
__________________
---
Jim Becker

SR-44, 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
http://bvww.us
Reply With Quote
  #9  
Old 07-25-2018, 03:17 PM
R.L.Schulz R.L.Schulz is offline
CAMaster Owner
 
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 43
Default

Congratulations Ron!
__________________
Ron & Tammy Schulz
CAMaster Stinger III SR-48
X3 + 2" Gantry Lift + Extended Gantry
HSD 3.0 KW + Counter Balance
Laser Pointer + Tool Measure Switch
Indexing Recoil Lathe
Hurricane Vacuum System
WinCNC
Vectric Aspire 9
Cabinet Planner
Reply With Quote
  #10  
Old 07-25-2018, 07:41 PM
Mike Fuson Mike Fuson is offline
CAMhead Friend
 
Join Date: Jan 2018
Posts: 82
Default

Quote:
Originally Posted by bruce tait View Post
Looking good there Mr. Lee! Now you just need a Stinger to complete your collection.
Donít give him any ideas Bruce!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:35 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.