CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > CAMaster Machines > Recoil Indexing Lathe (4th Axis)

Reply
 
Thread Tools Display Modes
  #1  
Old 06-28-2017, 09:34 AM
cekonecky cekonecky is offline
CAMhead Guest
 
Join Date: Sep 2016
Location: Brooklyn, NY
Posts: 3
Default Rotary Feedrates

I'm getting into using the rotary axis on my cobra and have some questions. I have been writing a code to cut tapered spindles for a stool. I've been testing my codes without any stock to see if they're looking right, and I've almost got it, but I'm having issues with feedrates. I'm not sure what controls the feedrate of my Y and A axes. My most recent code ran almost perfectly, except for my A was spinning too slowly relative to my Y - would've ended up with a spiral flute rather than a smooth spindle. To adjust this I upped the number of rotations of the A axis in each move relative to the Y movements. When running the second code my A was spinning fast enough it seemed, but my Y had slowed down to about .001" every 2 seconds. Do you know why my Y would have slowed down even though I didn't alter it at all? Any other useful tips regarding feedrates for A and Y when doing this type of work? Attached are my two most recent codes, the first link being the code where Y was fine but A too slow, and the second link is the code where I attempted to speed up A but in turn also slowed Y way down.
Thanks so much,
Christopher Konecky
Attached Files
File Type: tap Rotary Test Parent File (YZ).tap (4.0 KB, 9 views)
File Type: tap ROTARY TEST 1.tap (4.1 KB, 6 views)
Reply With Quote
  #2  
Old 06-28-2017, 10:16 AM
de5 de5 is offline
Cobra Owner
 
Join Date: Jan 2011
Location: Honea Path, SC
Posts: 792
Default

When I did rotary work, my feed rates looked like this:

N18 F200 XY
N19 F150 Z
N20 F 10000 A

I'm no expert on rotary, but this seemed to work well.

Charlie
__________________
Charlie Hind
K2 CNC (2006 - sold in 2012)
Cobra 404 ATC with 12 tool positions & 4th Axis (2012-present)
WinCNC
www.hindocarina.com
http://facebook.com/hindocarina
Reply With Quote
  #3  
Old 06-28-2017, 12:00 PM
eph210 eph210 is offline
Camaster Owner
 
Join Date: Feb 2013
Location: southern Alberta
Posts: 140
Default

Each G code instruction gives the destination point for all of the axes (A,Y,Z). All three axes have to arrive at the destination point simultaneously. When you increase one axis distance the other two axes must slow down to still arrive simultaneously. Increasing the A axis movement from 90 to 1350 degrees will slow down the other two axes by the same ratio.
By the way, WinCNC from the factory is limited to 99,999 degrees of rotation.
__________________
Euan Hanchard
Serrano Studios
Stinger I FTC
Wincnc vcarvepro
Reply With Quote
  #4  
Old 06-29-2017, 08:49 AM
Mick Martin's Avatar
Mick Martin Mick Martin is offline
CAMaster Cobra Owner (MOD, KOTR)
 
Join Date: Nov 2009
Location: Federal Way, WA
Posts: 3,336
Default

"XYZ" axis are measured in inches the "A" axis is measured in degrees.
Quote:
N18 F200 XY
N19 F150 Z
N20 F 10000 A
I was just reading your tap files and you have a lot of lines you should be able to greatly reduce that to a few lines of G-Code

Start Position/Start Diameter -> Finish position/finish Diameter = this will give you a taper.
__________________
Mick Martin
mickmartin3@comcast.net
CAMaster Cobra 508 ATC + Recoil + Popup Pins
Digitize Touch Probe
Wincnc Handheld Serial Keypad + Wireless Pendant
Hurricane vacuum
WinCNC + Aspire 8 + PhotoVCarve + EnRoute 5
http://dropc.am/p/eaLXUP
www.customarchitecturalsignage.com
www.mickmartinwoodworking.com/

The search function on the forum is your best friend!

Last edited by Mick Martin; 06-29-2017 at 08:57 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:46 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.