CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > The CAMhead Locker Room! > Steve Godding

Reply
 
Thread Tools Display Modes
  #1  
Old 08-02-2014, 07:24 PM
sgodding sgodding is offline
Camaster Owner
 
Join Date: Sep 2013
Location: Henryville, PA
Posts: 425
Default Moving advice

I'm moving to a new shop in about a month or so, a few miles from my current shop. Starting to plan the logistics of moving all this equipment to the new place, setting up dust control, wiring, air, etc. etc. One worry right now is how to move my Stinger 3, which is nearly as big and heavy as a Cobra - perhaps a little less than a ton. I can get a flat-bed wrecker here to move it, but that assumes I can get the machine to the wrecker. It needs to go up on wheels. Does anyone have suggestions for casters or heavy dollies that will allow us to move it up and on the wrecker, then back down and into place in the new space? We used 4 furniture dollies under the crate when we moved this into place in the current shop, and it was all we could do to push it, plus it about broke the dollies. I don't think they would survive a trip on the wrecker over our local roads. Anyone done this and have some advice?
__________________
Steve Godding
D&S Artistic Woodworking LLC
Reply With Quote
  #2  
Old 08-02-2014, 08:20 PM
gachua gachua is offline
Camaster Owner
 
Join Date: Apr 2014
Location: Morrisville, NC
Posts: 252
Default

What terrain will be between your shop and the flatbed wrecker? Concrete, Ashphalt? Is it flat?

My Stinger 3 was delivered on a flat bed utility trailer. We put some all terrain casters on it while in the trailer and manually rolled it down the gate and down a grassy hill. Manually getting it up the trailer would probably not have been possible. I'm thinking a flatbed with a winch would do the trick for you.

You could take the casters off once it is on the flatbed so that you could secure it properly and then put them back on when you get to your new shop. Wasn't difficult to get the casters on and off. Just need a jack and some wood blocks or jack stands.
__________________
Glenn Chua
gachua@gmail.com
Morrisville, NC
*.*.*.*.*.*.*.*.*.*.*
CAMaster Stinger III

Last edited by gachua; 08-02-2014 at 08:23 PM.
Reply With Quote
  #3  
Old 08-02-2014, 09:45 PM
tom klass tom klass is offline
Stinger I Owner
 
Join Date: Jun 2011
Location: Hamburg,N.Y.
Posts: 436
Default

if you're moving it on concrete see if you can rent steel skate rollers they will handle from 15 to 400 tons that would be no problem with stinger 3. it willon black top but you should put down sheet metal to roll on.
__________________
Tom Klass
Klassic Custom Woodworking
Stinger. 1 with recoil lathe
1.7 kw spindle
Digit. Probe, laser pointer,Aspire,WinCNC
Reply With Quote
  #4  
Old 08-03-2014, 08:36 AM
darren salyer darren salyer is offline
CAMhead Legend
 
Join Date: Sep 2008
Location: wentzville Mo
Posts: 145
Default

I have four of these I bought to move my Mustang around in the garage at home.
One under each leg makes moving easy.

http://www.harborfreight.com/2-piece...ies-67511.html
Reply With Quote
  #5  
Old 08-03-2014, 09:02 AM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 6,693
Default

we move the machine with pallet jacks.
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ
Reply With Quote
  #6  
Old 01-03-2017, 09:47 PM
Carter Whyte Carter Whyte is offline
CAMaster Owner
 
Join Date: Jan 2016
Location: Ballston Spa
Posts: 91
Default

Quote:
Originally Posted by james mcgrew View Post
we move the machine with pallet jacks.
I've done this as well. 2 small pallet jacks; nothing fancy or heavy duty. At my old job. We moved a Cobra. I actually didn't think it was going to work out well.. they were very low end pallet jacks.. but we managed. Only moved it about 100' though and turned 270 degrees.
__________________
Cobra Elite 510 ATC
Recoil Lathe
Rexford NY
C. T. Whyte LLC
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:40 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.