CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > Tips & Techniques > CAMaster Cabinetmaking

Reply
 
Thread Tools Display Modes
  #1  
Old 11-20-2014, 05:51 PM
bmc0787 bmc0787 is offline
CAMhead Friend
 
Join Date: Dec 2012
Posts: 158
Default hanging commercial wall panels

this is a question to all commercial cabinet shop owners.
I have an office job coming up that requires 3/4" painted mdf wall panels with 1/4 inch kerf cuts throughout. Previously I have used z clips. I would like to hear feedback on any other methods that may be a faster install. The walls are 8 feet tall
thanks
Brian
Reply With Quote
  #2  
Old 11-20-2014, 06:52 PM
eandico eandico is offline
CAMaster Owner
 
Join Date: Jun 2010
Posts: 1,282
Default

Z clips/french cleats are the standard.

You may be able to run a trim head screw in the .25 quirk.
If you can hide it. All most all that I have installed the quirk was painted black so you could get some fasteners in there and conceal them pretty well.
__________________
Best,
Nick
www.theeandicompany.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:59 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.