CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > New Forum Members
Reload this Page Hello from Kentucky
CAMaster.com Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Page 1 of 2 1 2
 
Thread Tools Display Modes
  #1  
Old 01-09-2018, 11:00 PM
Mike Fuson Mike Fuson is offline
CAMhead Friend
  
Join Date: Jan 2018
Posts: 59
Default Hello from Kentucky
I’m new on here and I thought I’d introduce myself. My name is Mike Fuson, I’ve been building custom kitchen cabinets for almost 20 years full time. I had never really considered the possibility of a cnc router because I thought they were all three phase powered. I recently learned different and have been doing a ton of research. I’ve pretty much decided that when and if I get one it will be a panther 5x8 with the ATC. I am very ignorant on the cnc world at this point but am learning a lot. I’m hoping to get one maybe around the end of summer. I built my business on buying equipment as I got the funds so this is a big investment for me. I sent in an online quote request Friday but haven’t heard back yet. I look forward to learning all I can on here from you guys until that time comes. Thanks for letting me be a part of the forum.
Reply With Quote
  #2  
Old 01-10-2018, 07:04 AM
neal_meyers_jr neal_meyers_jr is offline
CAMaster Cobra Owner
  
Join Date: May 2011
Location: Guyton, Ga
Posts: 607
Send a message via Skype™ to neal_meyers_jr
Cool
Welcome to the forum!
__________________
Owner with Recoil



Neal Meyers Jr
Guyton Ga
Aspire 4.0, WinCNC, Rhino, Mastercam, Autocad, Catia.
Reply With Quote
  #3  
Old 01-10-2018, 07:53 AM
Jim_in_PA Jim_in_PA is offline
CAMaster Owner
  
Join Date: Jan 2018
Location: SE PA
Posts: 220
Default
Mike, welcome from another "newbie" to this stuff!

I also didn't get a timely response to my quote request from the web form, but I messaged a fellow who's in the sales area of this forum last night to hopefully "kick things up a notch". :)
Reply With Quote
  #4  
Old 01-10-2018, 08:21 PM
Mike Fuson Mike Fuson is offline
CAMhead Friend
  
Join Date: Jan 2018
Posts: 59
Default
I got an email today from them. They are wanting more info to help me get all that I want. Ill probably just call and talk to them because I have a few questions.
Reply With Quote
  #5  
Old 01-10-2018, 10:34 PM
ScottM ScottM is offline
CAMaster Owner
  
Join Date: Feb 2017
Posts: 31
Default
Hi Mike, where abouts in the great state of Kentucky?

I am over in Evansville, Indiana on the west side.

Scott
__________________
Camaster PT-408, 6-tool ATC, 5hp HSD, Servos, Hurricane
Aspire 9
Reply With Quote
  #6  
Old 01-10-2018, 11:30 PM
Mike Fuson Mike Fuson is offline
CAMhead Friend
  
Join Date: Jan 2018
Posts: 59
Default
Quote:
Originally Posted by ScottM View Post
Hi Mike, where abouts in the great state of Kentucky?

I am over in Evansville, Indiana on the west side.

Scott
Hey Scott, I’m in the Ky, Va, Tn tri-state area, about 30 minutes from Cumberland Gap. I used to work in Monroe IA, about 25 years ago.
Reply With Quote
  #7  
Old 01-11-2018, 10:51 PM
ScottM ScottM is offline
CAMaster Owner
  
Join Date: Feb 2017
Posts: 31
Default
ok, a bit far for a quick trip over to say howdy!
__________________
Camaster PT-408, 6-tool ATC, 5hp HSD, Servos, Hurricane
Aspire 9
Reply With Quote
  #8  
Old 01-30-2018, 06:52 AM
R.L.Schulz R.L.Schulz is offline
CAMaster Owner
  
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 35
Default
Welcome Mike!
We're up here in Cincinnati, OH
I visit Lake Cumberland a couple times a year and I get to London, KY a few times a year down to a place called Wildcat for some ATV Riding and Camping with family and friends.
We're not too far away, bout 3.5 hours
__________________
Ron & Tammy Schulz
CAMaster Stinger III SR-48
X3 + 2" Gantry Lift + Extended Gantry
HSD 3.0 KW + Counter Balance
Laser Pointer + Tool Measure Switch
Indexing Recoil Lathe
Hurricane Vacuum System
WinCNC
Vectric Aspire 9
Cabinet Planner
Reply With Quote
  #9  
Old 01-30-2018, 06:13 PM
carasel carasel is offline
CAMhead Friend
  
Join Date: Jul 2012
Location: North East TN.
Posts: 73
Default
Mike,
If you ever get into north east Tn. Your welcome to stop by and see my machine and setup. I am about 20 minutes away from the Bristol race track.
My main use of the router is cutting cabinet parts. The quality of cut and fit of parts is so nice.
__________________
Eddie Kitson
Cobra 5x8 ATC
5hp spindle
20hp regen vac
laser pointer
V carve 8.0
Reply With Quote
  #10  
Old 01-30-2018, 10:52 PM
Mike Fuson Mike Fuson is offline
CAMhead Friend
  
Join Date: Jan 2018
Posts: 59
Default
Quote:
Originally Posted by R.L.Schulz View Post
Welcome Mike!
We're up here in Cincinnati, OH
I visit Lake Cumberland a couple times a year and I get to London, KY a few times a year down to a place called Wildcat for some ATV Riding and Camping with family and friends.
We're not too far away, bout 3.5 hours
Ron, I know where you’re talking about, I think my brother has rode there before. I’ve fished Lake Cumberland before.
Reply With Quote
Reply
Page 1 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:33 AM.

Contact Us - www.CAMaster.com - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.