CAMheads CNC Router Forum By: CAMaster CNC

CAMheads CNC Router Forum By: CAMaster CNC (http://www.camheads.org/index.php)
-   Woodworking Tools For Sale (http://www.camheads.org/forumdisplay.php?f=50)
-   -   FPZ Regen vac (http://www.camheads.org/showthread.php?t=8944)

jbiddle 02-23-2018 10:43 AM

FPZ Regen vac
 
2 Attachment(s)
I have my FPZ 15hp regen vac for sale. It was ordered in Dec of 2015 and put into service in Feb of 2017, so it has less than a year's use. The unit is 3 phase and requires a 60amp breaker. Price lowered to $4,000.

It includes:
-FPZ 15 hp regen pump with accessories (safety valve, inline vacuum filter, inlet vacuum filter, vac guage).
-Motor starter with start/stop and overloads.
-Remote disconnect with electrical interlock.
-All 3" PVC piping from vacuum to machine.
-Vacuum rated hose at pump and machine for isolation.
-Isolation mounts for pump.

jbiddle 03-21-2018 12:14 AM

still for sale!

Doug S 03-21-2018 12:51 PM

Blower for sale
 
If you don't mind me asking, what are you moving to after this sale?
I have a 5x10 with a 20 horse Becker blower. I have been told the smalls are sometimes still an issue.
Thanks in advance

jbiddle 03-21-2018 07:10 PM

Quote:

Originally Posted by Doug S (Post 72370)
If you don't mind me asking, what are you moving to after this sale?
I have a 5x10 with a 20 horse Becker blower. I have been told the smalls are sometimes still an issue.
Thanks in advance

I sold my Panther to an new owner who didn't have the 3-phase needed by the FPZ, so I'm selling it separately. It performed well on the 4' x 8' bed of the Panther and I don't know what issues you're referring to. Once we figured out onion skinning on small parts, we very seldom had anything move on us, and then most of that was due to user error.

Who knows, it may be too small for a 5' x 10', but I was never in a position to test that.


All times are GMT -4. The time now is 12:42 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.