View Single Post
  #6  
Old 01-08-2020, 08:09 PM
rcrawford rcrawford is offline
Cobra Owner
 
Join Date: Dec 2011
Location: Alberta
Posts: 2,360
Default

Quote:
Originally Posted by guitarwes View Post
You could always rout channels and install a T-track system into your phenolic top to hold down various sizes of material.
If you design it properly, you can use shorter 2' T-track sections that fit entirely within each vac zone, so when you through a spoilboard on top you can still use each vacuum zone separately. If you leave a little gap above the T-track, the vacuum can still pass over it and so it shouldn't affect your vacuum plenum much at all.
__________________
Russell Crawford
Cobra 408 ATC with recoil
Alberta, Canada
www.cherryleaf-rustle.com
Reply With Quote