|
|
#11
05-11-2017, 12:52 PM
|
|||
|
|||
Thanks for the update Kevin. The BLE updates are undoubtedly time consuming. Looking forward to the keypad when you have 'em. cheers!
__________________
Mike Davison www.DavisonWoodworks.com Stinger II with Recoil, GCNC Sidewinder Lathe, Aspire, Sketchup 
|
|
#12
09-06-2018, 02:09 PM
|
|||
|
|||
|
CAMaster won't sell me a 30 key version with my machine. Would I be able to get the custom CAMaster macros if I buy the 30 key version from US Router Tools instead of the 20 key version from CAMaster?
__________________
Gary 2018 Stinger II SR-44, 1.7kW Spindle, Performance Premium, Recoil, Gantry Lift, Cyclone Fusion 360 Aspire Last edited by DVE2000; 09-06-2018 at 02:38 PM.
|
|
#13
09-06-2018, 02:18 PM
|
|||
|
|||
|
Quote:
Our website has the templates if you need another, you can download the PDF or let me know and I can send you one.
__________________
Kevin Stoops Cobra's 508 ATC Recoil, vacuum hold down. Aspire 9, Photo w/Cut-3d, CPP 30W Fiber Laser TDS Control Keypads - Inventor of the TDS/KRS Keypads www.krscorporation.com for keypad support home YouTube Videos
|
|
#15
05-05-2019, 12:50 PM
|
|||
|
|||
|
I bought a 30 key pad to use with my Stinger 1 a while back, and most of the keys don't do anything. The x,y,z keys do work, and that was what I wanted most, so I never tried to program the others.
Today I tried to get it into configuration mode, but it gives a single beep and isn't detected by the configuration program. In note pad, the x,y,z keys do see to have codes that get entered. Is there a way to program it so the laser on/off and the .001"/.01"/fast/slow... keys will work with my computer? It seems like there are custom templates, but I can't even get it into configuration mode, so I'm not sure how to update it. Thanks, Todd
|
|
#16
05-05-2019, 01:12 PM
|
|||
|
|||
|
Todd,
Make sure you get the latest configuration software. Watch the video on the site on how to enter config mode, you have to press the buttons immediately after plugging in the cable to get the two beeps. I am traveling today but will get on line later to explain more.
__________________
Kevin Stoops Cobra's 508 ATC Recoil, vacuum hold down. Aspire 9, Photo w/Cut-3d, CPP 30W Fiber Laser TDS Control Keypads - Inventor of the TDS/KRS Keypads www.krscorporation.com for keypad support home YouTube Videos
|
|
#17
05-06-2019, 11:40 AM
|
|||
|
|||
|
I have the latest software. Maybe I waited too long before hitting the two buttons. I'll try again later today when I get a break from work.
Todd Hitting the two keys right after plugging in the USB cable did work. Now I have to figure out how to enter the zero xy lines and such. Thanks, Todd Last edited by Todd W; 05-13-2019 at 04:03 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
