CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > The Water Cooler

Reply
 
Thread Tools Display Modes
  #11  
Old 02-23-2021, 12:16 PM
rcrawford rcrawford is offline
Cobra Owner
 
Join Date: Dec 2011
Location: Alberta
Posts: 2,507
Default

Its an Aspire file, so CRV3D. It was over 10MB, so I resaved it at a lower resolution to get it down to 8MB, but it still won't post. It might be my firewall at work that isn't letting it through. The firewall is a hardware one, and not something I can change (above my skill level!!). I'll try again at home tonight.
__________________
Russell Crawford
Cobra 408 ATC with recoil
Alberta, Canada
www.cherryleaf-rustle.com
Reply With Quote
  #12  
Old 02-23-2021, 12:26 PM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 7,417
Default

I just raised the download limit on vectric files try again
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ

fixed 4-27-2020
Reply With Quote
  #13  
Old 02-23-2021, 12:48 PM
rcrawford rcrawford is offline
Cobra Owner
 
Join Date: Dec 2011
Location: Alberta
Posts: 2,507
Default

It just tells me "upload fails" now. I'm assuming its my firewall, because I've successfully uploaded many crv3d files before (but from my home computer).

I'll try again tonight.
__________________
Russell Crawford
Cobra 408 ATC with recoil
Alberta, Canada
www.cherryleaf-rustle.com
Reply With Quote
  #14  
Old 02-23-2021, 01:00 PM
rcrawford rcrawford is offline
Cobra Owner
 
Join Date: Dec 2011
Location: Alberta
Posts: 2,507
Default

But I'll explain how I made that model.

Pictures of the steps are below

I keep the vectors in two halves for the first part of the modelling, right and left. You'll see the profile vectors extend longer than the actual model will be, and that is just for ease of 'smoothing' later.

Pay careful attention to the parameters I used in each modelling procedure, because it makes a big difference if you use 'add to previous component', 'extract from previous component', 'merge highest' or 'merge lowest'. I use most of these at different times. I also do not use 'scale cross section with width'

I changed a few minor things after I took some of these pictures, but it gives you the basic idea.
Attached Images
File Type: jpg 1.jpg (82.7 KB, 22 views)
File Type: jpg 2.jpg (82.1 KB, 20 views)
File Type: jpg 3.jpg (85.1 KB, 18 views)
File Type: jpg 4.jpg (83.6 KB, 18 views)
File Type: jpg 5.jpg (85.5 KB, 17 views)
File Type: jpg 6.jpg (82.7 KB, 16 views)
File Type: jpg 7.jpg (84.7 KB, 17 views)
File Type: jpg 8.jpg (75.5 KB, 14 views)
__________________
Russell Crawford
Cobra 408 ATC with recoil
Alberta, Canada
www.cherryleaf-rustle.com
Reply With Quote
  #15  
Old 02-23-2021, 02:14 PM
keithrhyde keithrhyde is offline
CAMaster Owner
 
Join Date: Jun 2016
Location: Winchester, Virginia
Posts: 394
Default

Quote:
Originally Posted by James mcgrew View Post
I just raised the download limit on Vectric files try again
I reported this problem December 6, 2020 and sent Mr. Martin a note about it with no response. Please see text below.

Mick, I get this error below when I try to upload pictures. Can you fix please?

"Your submission could not be processed because a security token was missing. If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error."

I just thought that he was very busy and never followed up. I have seen a number of posts where folks are having the same issue and it seems to be more prevalent recently. I don't think the size of the picture is the issue since comcast severely limits picture size to upload. I hope this helps the admins.
__________________
Keith Hyde, Winchester, VA
2016 Stinger 1, 1.7KW HF Spindle HSD
Performance Package Pro, Vac, lathe, Aspire 10
Former Marine and retired Seabee Master Chief.
Furniture is my hobby not my vocation.
hyde.consulting@comcast.net
Reply With Quote
  #16  
Old 02-23-2021, 02:36 PM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 7,417
Default

Mick May have told me about it yet I can never find anything wrong, most who cannot post or see photos it is a permission problem. This seems to be a problem beyound the forum, I can post files with no problem
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ

fixed 4-27-2020
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:59 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.