CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > The CAMhead Locker Room!

Reply
 
Thread Tools Display Modes
  #1  
Old 02-22-2016, 06:26 PM
CosmosK CosmosK is offline
CAMaster Owner
 
Join Date: Jul 2014
Location: Fort Worth
Posts: 799
Default PC Cabinet

Here's my version of a computer cabinet. I tried to get as much in this thing as I could to keep my benches clear. I also routed the HVAC from the electrical cabinet through this as I've had enough of blowing out dust from that thing. The bottom area is accessible, but I have to flip up the top to get to the top shelf where I'm housing the some electronics and pneumatic lines. I hinged it off my electrical cabinet also so I won't ever have to worry about pulling the CNC cable. Pretty crude box really, but I managed to fit the PC, my stereo, battery chargers, and the switch gear. Now the electrical cabinet and the PC can breather clean air. I put a 16x20 furnace filter on the back to allow some transfer in case it gets hot.
Attached Images
File Type: jpg IMG_1519.jpg (94.2 KB, 205 views)
File Type: jpg IMG_1514.jpg (91.8 KB, 200 views)
File Type: jpg IMG_1516.jpg (92.6 KB, 183 views)
File Type: jpg IMG_1517.jpg (92.2 KB, 176 views)
__________________
2014 Stinger II (SR-44)
1.7 kW Spindle w/ speed control, Performance kit, VCarve Pro
www.cosmos-industrial.com
>Pen Marking Tools
Reply With Quote
  #2  
Old 02-22-2016, 09:27 PM
Bruce Page Bruce Page is offline
Stinger I Owner
 
Join Date: Dec 2012
Location: Albuquerque, NM
Posts: 1,456
Default

Cool! It looks like Mission Control!
__________________
Bruce Page
Retired Hobbyist
2013 Stinger 1 SR23
FTC
Laser Pointer
HSD 1.7kw Spindle
KRS USB Keypad
Mick Martin Table
Aspire 8.5, WinCNC
Chips-a-flyin’
brucep128@gmail.com
Reply With Quote
  #3  
Old 02-23-2016, 10:57 AM
CosmosK CosmosK is offline
CAMaster Owner
 
Join Date: Jul 2014
Location: Fort Worth
Posts: 799
Default

Thanks, drag knife up next
__________________
2014 Stinger II (SR-44)
1.7 kW Spindle w/ speed control, Performance kit, VCarve Pro
www.cosmos-industrial.com
>Pen Marking Tools
Reply With Quote
  #4  
Old 02-24-2016, 12:02 AM
Tristan Tristan is offline
CAMaster Owner
 
Join Date: Jul 2013
Location: KZN, South Africa
Posts: 140
Send a message via Skype™ to Tristan
Default

Wow, that is cool... Looks the buttons on top to switch on radio, etc. And very compact and organized. Well done...
__________________
Tristan Brammer

CAMaster Cobra CR-609 ATC
2018 CAMaster Elite CR-609 ATC

WINCNC
Enroute 4 and Aspire v8 Design Software
AutoCAD, Autosketch, Sketchup

Razor CNC
Mach3
Aspire v8

"Sawdust means Work in Progress"
Reply With Quote
  #5  
Old 02-24-2016, 12:52 AM
dwolbeck dwolbeck is offline
Camaster Owner
 
Join Date: Nov 2013
Location: Heisler, Alberta
Posts: 149
Default

Cool! My keyboard hasn't been that clean since it came out of the box!
__________________
Dennis Wolbeck

SR-44
Performance Package
3.25 HP router
T-slot table
Vcarve software
Reply With Quote
  #6  
Old 02-24-2016, 11:08 AM
CosmosK CosmosK is offline
CAMaster Owner
 
Join Date: Jul 2014
Location: Fort Worth
Posts: 799
Default

Yeah, I've been tripping over stuff for long enough I wanted to consolidate everything I could. Eventually I'm going to design a dust boot that actuated back and forth on an air cylinder, so I have the toggle switch for that, but it doesn't do anything yet.
__________________
2014 Stinger II (SR-44)
1.7 kW Spindle w/ speed control, Performance kit, VCarve Pro
www.cosmos-industrial.com
>Pen Marking Tools
Reply With Quote
  #7  
Old 02-24-2016, 11:24 AM
CodySmith's Avatar
CodySmith CodySmith is offline
CAMaster Sales
 
Join Date: Nov 2015
Location: Roswell, GA
Posts: 62
Default Nicely Done

Great work on the cabinet, you will have the cleanest components in the business.


Quote:
Originally Posted by CosmosK View Post
Here's my version of a computer cabinet. I tried to get as much in this thing as I could to keep my benches clear. I also routed the HVAC from the electrical cabinet through this as I've had enough of blowing out dust from that thing. The bottom area is accessible, but I have to flip up the top to get to the top shelf where I'm housing the some electronics and pneumatic lines. I hinged it off my electrical cabinet also so I won't ever have to worry about pulling the CNC cable. Pretty crude box really, but I managed to fit the PC, my stereo, battery chargers, and the switch gear. Now the electrical cabinet and the PC can breather clean air. I put a 16x20 furnace filter on the back to allow some transfer in case it gets hot.
__________________
Cody Smith
Sales Manager
Direct: 678-792-3835
cody@camaster.com
www.camaster.com
Reply With Quote
  #8  
Old 02-24-2016, 11:28 AM
CosmosK CosmosK is offline
CAMaster Owner
 
Join Date: Jul 2014
Location: Fort Worth
Posts: 799
Default

it tells you how good my dust collector is working !! :)
__________________
2014 Stinger II (SR-44)
1.7 kW Spindle w/ speed control, Performance kit, VCarve Pro
www.cosmos-industrial.com
>Pen Marking Tools
Reply With Quote
Reply

Tags
desk

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.