CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > Software > Vectric - Aspire

Reply
 
Thread Tools Display Modes
  #1  
Old 06-05-2021, 03:41 PM
Laserman Laserman is offline
CAMhead Friend
 
Join Date: Oct 2020
Posts: 57
Default Enter Registration Code "Missing from Help section"

They have changed it. I can no longer find "Enter License Code" under The help section of Aspire. For those that have recently set this up. Where the hell is it.

There is even YouTube video's out there. But they moved it someplace and I can not find it. I could uninstall aspire but I would hate to loose all my setup and tools that I added. I think it lets you enter the code at the time of setup.

Why on earth would they change or make it more difficult to setup I have no ideal. The directions in my email with the code are the same as the directions I found on the web.
Reply With Quote
  #2  
Old 06-05-2021, 04:13 PM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 7,465
Default

if you have a registered copy then got to the vectric portal

Yes it has changed, contact vectric direct if you have ant problems
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ

fixed 4-27-2020
Reply With Quote
  #3  
Old 06-05-2021, 07:40 PM
Jim Becker Jim Becker is offline
ADMINISTRATOR
 
Join Date: Jan 2018
Location: SE PA
Posts: 2,093
Default

All registration and licensing is handled electronically via the Vectric Portal that Mr. McGrew mentioned. They started doing this with, I believe, the introduction of v9 a few years ago.

Updates are also handled by the same mechanism.
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
Reply With Quote
  #4  
Old 06-05-2021, 09:21 PM
Laserman Laserman is offline
CAMhead Friend
 
Join Date: Oct 2020
Posts: 57
Default

Thanks for the information. I did not bother registering until it was the weekend. My first time i had to do the first cuts and the spoil board and nothing else. Just disappointing i did not find this info i research.
Reply With Quote
  #5  
Old 06-06-2021, 02:41 PM
sgodding sgodding is offline
Camaster Owner
 
Join Date: Sep 2013
Location: Henryville, PA
Posts: 486
Default

The "Enter license code" option is available in my copy of Aspire 10.514, so not sure why you're not seeing it.
Attached Images
File Type: jpg 2021-06-06.jpg (60.7 KB, 8 views)
__________________
Steve Godding
D&S Artistic Woodworking LLC
Reply With Quote
  #6  
Old 06-06-2021, 07:55 PM
Jim Becker Jim Becker is offline
ADMINISTRATOR
 
Join Date: Jan 2018
Location: SE PA
Posts: 2,093
Default

Yes, it can be entered manually, but one must still obtain it from the Vectric Portal.
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.