SR-48 Stringer X3 - CAMheads CNC Router Forum By: CAMaster CNC

JonnyU · #1 03-10-2021, 01:37 PM

Selling our X3. PM for details. Machine located in South Florida.

Stinger III CNC Router:
- 49" x 97" x 6" Cutting Area
- Milwaukee 3.5 HP Variable-speed Router
- Router On\Off Via G Code and Control PC
- Standard 3 axis (Dual Drive on Y) High Definition NEMA 34 1100 oz Digital Microstep Drive System
- 1 Inch Sealed MDF Tabletop
- 25 MM Industrial Precision Bearings And Rails On All Axes
- Dust Hood with Outlet for Connecting to Dust Collector
- Emergency Stop Switch (E-Stop)
- Z Tool Measure Pad
- Limit Switches On All Axes With Soft Limits
- Welded Frame
- V-Carve PRO Software
- WinCNC Windows PC-Based CNC Control System W/ PC, Keyboard, Mouse, & 19” Flat LCD Monitor
Upgrade to a 1.7 KW (2.27 HP) High Frequency Spindle from HSD (ER 25)
- Operates on 220-230V Single Phase Power
- Includes 1/4", 3/8" and 1/2" ER25 Collets
- Includes Spindle Speed Control. Gives user precise control of Spindle RPM through WinCNC.
Upgrade to the X3 Package. Includes:
- 2 Milwaukee 2.25 HP Side Mounted Router Heads
- Wider Gantry for Head Offset
- All Pneumatics
- Each side router is pneumatically raised/lowered and turned on/off via G Code
** The Fast Tool Change (FTC) and the Counter Balance come standard with the X3.
.
The Laser Pointer (Quickly set your Job Home and Zero out your X and Y)
Hurricane Vac System. 208-230V Single Phase Power @ 30A. 400 cfm 9.5 In Hg.
System Includes:
- 4 Industrial Vacuum Motors @ 20,900 RPM
- Inlet and Exhaust Filters
- Vacuum Gauge
- Vacuum Grided Table Top and Plumbing.
- Valves to control vacuum to each desired zones
** Comes with a NEMA L6-30P Plug .
D2 Drag Knife
- Enables you to cut thicker materials