CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > CAMaster Machines > Panther Series

Reply
 
Thread Tools Display Modes
  #1  
Old 06-13-2020, 09:21 PM
Wayne Wayne is offline
CAMaster Owner
 
Join Date: Feb 2020
Location: Tucson,AZ
Posts: 9
Default J Tech 7W Laser

I just recently had the time to actually set up and attempt to use the laser attachment on my Panther.
I downloaded the pp, made the tool, followed all the instructions.

When I run a file the laser fires but the z doesn't lower to the material.
The primary comes down but the laser stays at the top.

Yes i placed it on the work surface and zeroed it.
Even tried putting it in focus range and zeroing it.
No luck.

Anyone run into this and if so how did you solve it?

Thanks in advance.
__________________
408 ATC (8)
Recoil
Hurricane vac table
Pop up pins
Laser Engraver
Wireless pendant
Aspire
Reply With Quote
  #2  
Old 06-14-2020, 08:51 AM
Bruce Bruce is offline
CAMhead Friend
 
Join Date: May 2019
Location: Dallas, GA
Posts: 52
Default

I think this is what I have had to do.. hadn't run the laser in a month or so but this is what I think I have to do in order to make it lower to the z it needs...
Remove the laser and try putting in a bit and using the touch top device on top of the spoilboard to get the machine to zero to the touch top as opposed to the spoilboard... then zero the laser to the piece you're going to laser.. if I recall that's what I have to do as it seems the machine doesn't clear it's memory if zero'd originally from the spoilboard.
__________________
Bruce Jeansonne
decorativecabinets@comcast.net
CAMaster Panther 508
Laser Engraver
Hurricane Vacuum
WinCNC and VCarve Pro
https://www.facebook.com/decorativecabinets/
Reply With Quote
  #3  
Old 06-17-2020, 11:11 AM
Luke Bennett's Avatar
Luke Bennett Luke Bennett is offline
CAMaster Tech
 
Join Date: Mar 2010
Posts: 271
Default

Hey Wayne,

Give support a call. You will need to new updated post processor.
__________________
Luke Bennett
CAMaster CNC Tech
www.camaster.com

Frankenstinger 25x48 custom machine
Reply With Quote
  #4  
Old 06-22-2020, 04:49 PM
stob82 stob82 is offline
CAMhead Guest
 
Join Date: Oct 2019
Location: Seattle, WA
Posts: 4
Default

Any updates on this problem. I'm having a similar problem with my 7W laser.
Reply With Quote
  #5  
Old 08-27-2020, 03:52 PM
ColumbiaCNC ColumbiaCNC is offline
CAMhead Guest
 
Join Date: Aug 2020
Location: Vancouver, WA
Posts: 2
Default Same Problem, any Solutions?

I just got my table and am trying to use the laser, but, as described above, whenever I run the program the laser retreats up the z-axis and attempts to burn from about 15" above the material.

Since I am just starting this process my Post Processor was downloaded and installed today from
https://jtechphotonics.com/?p=3851

Any advice would be appreciated!
Reply With Quote
  #6  
Old 08-28-2020, 01:54 PM
ColumbiaCNC ColumbiaCNC is offline
CAMhead Guest
 
Join Date: Aug 2020
Location: Vancouver, WA
Posts: 2
Default

To anyone still having this problem; as of this posting the post processor on the jtonics website (CAMaster Laser INCH) is out of date. CAMaster support provided me with a new one (CAMaster Laser INCH No Z) that fixed this issue.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:33 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.