|
|
#1
11-24-2013, 04:40 PM
|
|||
|
|||
Mozaik made Y coord way out of limits
Running some nested parts. In the attached program, it gives a drilling location that is Y113. I only have a 4x8 table and all materials are listed as 48x96.
Mozaik is running a PP for the Cobra X3, as approved by Joey. 
|
|
#2
11-24-2013, 04:51 PM
|
||||
|
||||
|
check material size in moziak
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ
|
|
#3
11-24-2013, 05:07 PM
|
|||
|
|||
|
All materials are 48x96. On the nesting diagrams the sheet is 4x8.
|
|
#4
11-24-2013, 05:19 PM
|
||||
|
||||
|
Not making sense the software not the machine determine location ???
__________________
James McGrew CAMaster ATC 508 The principle of Measure twice cut once has not been replaced by a CNC www.mcgrewwoodwork.com https://www.facebook.com/pg/Mcgrew-W...=page_internal Camera 1 ATC Closeup ! https://video.nest.com/live/esNTrZ
|
|
#5
11-24-2013, 07:44 PM
|
|||
|
|||
|
Yeah, weird bug. Like there were three drawer slide holes off the board. I just changed the G code to have those lines hover over y90.
I ran three more sheets of cabinet parts after that, no problems.
|
|
#6
11-24-2013, 09:28 PM
|
||||
|
||||
|
I don't use the program Mozaik but check your layout, the tap is generated from the CAD program ..... I suspect you might have done something wrong go over you files again, otherwise contact Mozail.
__________________
Mick Martin mickmartin3@comcast.net CAMaster Cobra 508 ATC + Recoil + Popup Pins Digitize Touch Probe Wincnc Handheld Serial Keypad + Wireless Pendant Hurricane vacuum WinCNC + Aspire 9.5 + PhotoVCarve + EnRoute 5 www.customarchitecturalsignage.com www.mickmartinwoodworking.com/ The search function on the forum is your best friend!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
