CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > Software > FUSION 360

Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2019, 12:38 PM
akillion akillion is offline
CAMaster Owner
 
Join Date: Aug 2019
Location: Philly suburbs
Posts: 3
Default Error multiple commands

Good afternoon,
I have been trying to run a file out of fusion 360 as well as inventor. Everytime I try to run the file through win cnc I get "Error multiple commands" or file not found. I am using the wincnc_noatc postprocessor. I have been searching all over trying to get this taken care of but can't figure out what I need to do to get a post processor in inventor or fusion to work with win cnc. I could not attach the whole file so I copied and pasted some of the code below.
Thanks a ton in advance

[1001]
[T1 D=0.25 CR=0. - ZMIN=-2.582 - ball end mill]
G90
G20
G53
[Adaptive1]
S7330
M3
G0 X0.0312 Y2.0739
Z0.6
Z0.2
Z0.1
G3 X-0.0312 Y2.075 Z0.0966 I-0.0312 J0.0006 F55
X0.0312 Y2.0739 Z0.0931 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0897 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0863 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0829 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0794 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.076 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0726 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0691 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0657 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0623 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0589 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0554 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.052 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0486 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0451 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0417 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0383 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0349 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0314 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.028 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0246 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0211 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0177 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0143 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.0109 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0074 I-0.0312 J0.0006
X0.0312 Y2.0739 Z0.004 I0.0312 J-0.0006
X-0.0312 Y2.075 Z0.0006 I-0.0312 J0.0006
Reply With Quote
  #2  
Old 11-18-2019, 02:45 PM
Gary Campbell's Avatar
Gary Campbell Gary Campbell is offline
CNC Consultants and Trainers
 
Join Date: Dec 2012
Location: Marquette, MI USA
Posts: 2,977
Default

If you want a correct answer, attach the file that produced the error. The only issue I see with the included text is that there is a "G53" call with no axis parameters.
__________________
Gary Campbell
CNC Technology and Training
The Ultimate Woodworking Machine
GCnC411@gmail.com
https://www.youtube.com/user/Islaww1/videos

"There are 10 kinds of people in the world. Those that understand binary logic, and those who don't"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:03 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.