CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > ASPIRE CAMP AT MCGREW 2020

Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2020, 09:16 AM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 7,450
Default Updates on Virus and camp

Good Morning All,

I am looking at what to do about Camp. The information on this virus is much worse in other places than it is here, we have a very low count of infections. I could not have expected that we may cancel the entire camp yet we may have too, I will be refunding all when we do so sit tight I have every ones best interest at heart.

I had to rent the RR traailer seats and tables along with Paying the building Owner for the space, I am working to ensure this will all be refunded,

I will have more info but at this point no one needs to send me a cancel as With a sad heart i am working on this

Thanks Jim
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ

fixed 4-27-2020
Reply With Quote
  #2  
Old 03-13-2020, 10:39 AM
Jim Becker Jim Becker is offline
ADMINISTRATOR
 
Join Date: Jan 2018
Location: SE PA
Posts: 2,061
Default

Do what needs to be done, Jim. Events like this can always be rescheduled when it's in the best interest of the people who would be attending.
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
Reply With Quote
  #3  
Old 03-13-2020, 01:29 PM
drummerjg drummerjg is offline
CAMaster Owner
 
Join Date: Dec 2016
Location: Addison, PA
Posts: 1,198
Default

It would be a shame to have to cancel such a looked forward to event, but erring on the side of caution is always best. Hopefully by then things will be under control and calmer minds will be in higher supply. Im praying for both!
__________________
Joe Garber
Retired Hobbyist
Stinger 1 SR24
FTC
Laser Pointer
HSD 1.7kw Spindle
Indexing Lathe
WinCNC, Aspire 9.5, PhotoCarve
Storm Vacuum
drummerjg@icloud.com


How to count to 10 in Windows:
1,2,3,95,NT,2000,XP,Vista,7,8,10
Reply With Quote
  #4  
Old 03-13-2020, 03:20 PM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 7,450
Default

We may just rescedule in the next week we should be able to see more of this, hopefully a recedding situation
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ

fixed 4-27-2020
Reply With Quote
  #5  
Old 03-13-2020, 10:33 PM
Jim Becker Jim Becker is offline
ADMINISTRATOR
 
Join Date: Jan 2018
Location: SE PA
Posts: 2,061
Default

For rescheduling this year, at least a few months out or more toward the fall is probably the best bet given the nature of the thread. Three months in for Wuhan and while things are stabilized, more or less, there is quite a ways to go. We here in North America are quite a bit behind the curve still.
__________________
---
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro upgraded to Aspire

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone
more...

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
Reply With Quote
  #6  
Old 03-14-2020, 02:27 PM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 7,450
Default

I am amazazed that all the emails i got since i posted were to sit tight and or rescedule,
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ

fixed 4-27-2020
Reply With Quote
  #7  
Old 03-30-2020, 11:53 PM
Joey Jarrard's Avatar
Joey Jarrard Joey Jarrard is offline
Administrator
 
Join Date: Sep 2008
Location: Calhoun, GA
Posts: 3,223
Default

I know you have everyone’s wellbeing in mind as you go forward. I’m sure I speak for the vast majority here in saying that we are all looking forward when this is behind us and we can all meet safely for instruction, friendship, and fine food.

To everyone:
Please be safe out there. If you have children or older ones you care for please take all the precautions you can and only go out if needed.

You all are in everyone’s thoughts here at US Router Tools.
__________________
Joey Jarrard

US Router Tools
888-720-TOOL (8665)
www.usroutertools.com
Reply With Quote
  #8  
Old 09-07-2020, 11:18 PM
Davidbarton87 Davidbarton87 is offline
CAMhead Guest
 
Join Date: Jan 2020
Location: Charleston SC
Posts: 2
Default

Anybody have an update?
Reply With Quote
  #9  
Old 09-28-2020, 01:47 AM
eugene eugene is offline
CAMaster Owner
 
Join Date: Jul 2014
Posts: 86
Default

also wondering whats going on with aspire camp.
__________________
panther 508 on order
Reply With Quote
  #10  
Old 09-28-2020, 01:52 AM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 7,450
Default Updates

I had left knee replaced Friday AM, I will respond in more depth early this week, right now my left knee feels like someone is beating on it with a sledgehammer. LOL

Good news is it will get better.
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ

fixed 4-27-2020
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:31 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.