|
|
#31
10-03-2018, 09:29 AM
|
|||
|
|||
Unfortunately Spraying/Varnishing is a long process. The spraying itself can be quick, but the drying needs to happen properly, and that takes time. Then the varnish needs to be a high gloss varnish, then its just a few coats with de-nibbing between coats. In terms of the solar setup, that is purely to save on electricity costs, it can also be heated with electrical heaters. The tunnel only speeds up the drying time. We also use a catalyst to speed up the drying time, but each coat still takes an hour to dry.
__________________
Tristan Brammer CAMaster Cobra CR-609 ATC 2018 CAMaster Elite CR-609 ATC WINCNC Enroute 4 and Aspire v8 Design Software AutoCAD, Autosketch, Sketchup Razor CNC Mach3 Aspire v8 "Sawdust means Work in Progress" 
|
|
#32
10-05-2018, 07:53 PM
|
|||
|
|||
|
Thank you for sharing so much info Tristan. Hope life and work are going well for you over there!
__________________
Ron Lee Blackshear, Ga https://www.facebook.com/pg/premierw...=page_internal 2018 Cobra Elite 5 x 10 HSD 12HP ATC 20 Tool Holder 25HP Regen Vac 2017 Panther 408 HSD 5HP ATC 6 Tool Rotary Carousel Recoil Lathe Laser Aspire 9.5 PhotoVcarve Be humble. Be kind. Be grateful. Life is too short and prone to quickly change to live otherwise.
|
|
#34
01-11-2019, 10:04 AM
|
||||
|
||||
|
You can use the feedrate adjustment slider (next to the axis DRO's) or the [INS] key to increase feeds and the [DEL] key to decrease them. Pressing [CTRL] + [INS] or [DEL] sets back to 100% of programmed feedrate
__________________
Gary Campbell CNC Technology and Training The Ultimate Woodworking Machine GCnC411@gmail.com https://www.youtube.com/user/Islaww1/videos "There are 10 kinds of people in the world. Those that understand binary logic, and those who don't"
|
 |
| Tags |
| elite |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
