CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > CAMaster Machines > Stinger Series CNC Routers

Thread Tools Display Modes
Old 05-29-2018, 11:00 PM
genejameson genejameson is offline
CAMhead Friend
Join Date: Aug 2012
Posts: 19
Default Stinger II 3x4 phenolic table grid

Hi guys, I am the new owner of a 2016 Stinger II 3x4 machine. It has a phenolic table and has a grid cut into it. The original owner had it made with a 3 vacuum zones. I would like to add some threaded holes in the grid to have some mechanical hold down options. Are these grids usually milled at camaster before they are shipped or do the customers cut the grid. It would be nice to have this in a Vectric file so I could create my holes on the original geometry. I have measured the dimensions and the squares are approximately 1 9/16 with the air channels being 3/8". I have the ability to create this from scratch but thought I would check to see if the original cad file exists first.

Gene Jameson
Belton SC
Stinger II, 3x4, 6 tool rotary changer
FPZ Vacuum

Last edited by genejameson; 05-30-2018 at 12:27 AM.
Reply With Quote
Old 05-30-2018, 10:17 AM
Jim_in_PA Jim_in_PA is offline
CAMaster Owner
Join Date: Jan 2018
Location: SE PA
Posts: 779

Give a shout to Camaster support....they should be able to identify your machine (and make sure you're now listed as the owner) and tell you if it came equipped with the factory phenolic vacuum table. If so, they should be able to provide you with the Vectric file.
Jim Becker

SR-44 (2018), 1.7kw spindle, Performance Premium, USB, Keypad, T-Slot table (y-axis configuration), WinCNC, VCarve Pro

Non CNC stuff...

SCM/Minimax - slider/JP/BS
Festool "a good collection"
Stubby - lathe
Oneida Cyclone

Retired from full time work in the telecom industry 9/2017
Commission work for equestrian tack storage and other custom furniture and cabinetry
Located Bucks County PA
Reply With Quote
Old 05-30-2018, 11:38 PM
Rlee1972 Rlee1972 is offline
CAMaster Owner
Join Date: Mar 2017
Posts: 461

Welcome aboard! Look on the forum at what is required and get with James McGrew so he can change your status to that of a rock star, CAMaster Owner!

As Jim state and I am sure you have by now, be sure to touch base with Tech Support. You will find Michael and Luke two great guys and very willing to assist in any way possible!

Looking forward to seeing what you will produce!
Ron Lee
Blackshear, Ga
2018 Cobra Elite 5 x 10
20 Tool Holder
25HP Regen Vac

2017 Panther 408
6 Tool Rotary Carousel
Recoil Lathe
Aspire 9.0

Be humble.
Be kind.
Be grateful.
Life is too short and prone to quickly change to live otherwise.
Reply With Quote

vacuum table grid

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 07:18 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.