CAMheads CNC Router Forum By: CAMaster CNC

Go Back   CAMheads CNC Router Forum By: CAMaster CNC > The Water Cooler > The CAMhead Locker Room!

Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2016, 08:29 PM
dwood dwood is offline
CAMhead Friend
 
Join Date: Feb 2015
Location: Valdosta, GA
Posts: 33
Default Darryl Wood

This is my first guitar on my Stinger I. Everything except the fret board was cut on the CNC. I have since created a fret board in Aspire and will cut my own on the next guitar. It has a mahogany body with a booked matched figured maple top. The neck is mahogany with a stripe of purple heart and maple down the center. The black head stock veneer is ebony. The name is my homemade pearl look-alike using a mixture of Epoxy and white incandescent oil based paint. The only finish so far is a brown stain to pop the grain which will be sanded off before final finish is applied. This is our fifth guitar, but the first on the CNC.
__________________
Darryl Wood
Stinger I
Stinger Performance Package
WinCNC
Aspire 8

Bought experience is the best kind, as long as it doesn't cost you too much.

Last edited by dwood; 02-06-2016 at 08:38 PM. Reason: Pictures did not upload
Reply With Quote
  #2  
Old 02-06-2016, 11:53 PM
Hallex Hallex is offline
Camaster owner
 
Join Date: Oct 2014
Location: Al
Posts: 114
Default

Very nice.
__________________
Camhead FAN
Reply With Quote
  #3  
Old 02-07-2016, 12:20 AM
mike.davison mike.davison is offline
CAMaster Owner
 
Join Date: Jul 2015
Location: Bolton, Massachusetts
Posts: 436
Default

Inspiring work!
__________________
Mike Davison
Stinger II 4x4, Recoil, spindle, FTC, Aspire, Sketchup
http://www.DavisonWoodworks.com/
Reply With Quote
  #4  
Old 02-07-2016, 07:16 AM
james mcgrew's Avatar
james mcgrew james mcgrew is offline
Administrator, (MOD, KOTR)
 
Join Date: Sep 2008
Location: ridgeway sc
Posts: 6,758
Default

Very cool !!
__________________
James McGrew
CAMaster ATC 508
The principle of Measure twice cut once has not been replaced by a CNC

www.mcgrewwoodwork.com

https://www.facebook.com/pg/Mcgrew-W...=page_internal

Camera 1 ATC Closeup !
https://video.nest.com/live/esNTrZ
Reply With Quote
  #5  
Old 02-07-2016, 10:08 AM
TinKnocker TinKnocker is offline
CAMaster owner
 
Join Date: Jun 2014
Location: MD
Posts: 272
Default

Looks hot! Post a pick when she's all strung up and wired.
__________________
-PETE MALONE

SR-34
V-Carve Pro V8
1.7kw Spindle, FTC and counter balance and T-rails
Recoil Ready
Reply With Quote
  #6  
Old 02-07-2016, 12:38 PM
adirondak5 adirondak5 is offline
Camaster Owner
 
Join Date: Dec 2012
Location: Long Island , NY
Posts: 672
Default

Nice work Darryl , yes , post some pics when its all stung up
__________________
Herb Holmes

Stinger I
Performance Pkg
Slotted table
WINCNC
Aspire 8.505
Porter Cable 2.25
CAMaster Stand
KRS USB Keypad


I've got to many clamps , and sometimes they are not enough
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.